Bunch of 44 bullets in a hurry

[Kurt]

I have three bullets that shoot very good in the 1/19 rot .44-77 or the .44-90bn. The original PP profile bullet from a mould that Steve Brooks made for me. This bullet weighs 485 gr and it is 1.3" long. The Brooks .44 500 gr GG is 1.47" long and it shoots extremely well all the way to the 1K. It has a reduced front driving band. The other is a Gibbs from KAL adjustable and I have it set at 1.360" or 480 gr. All three of these bullets shoot very well. I don't like the KAL Gibbs because this mould pours vent hairs and bad parting line fins. I have to take a knife and cut the fins and vent hair off. This would be a very good bullet if it would cast clean. I have a couple BA moulds GG and PP with a long nose and I don't get any accuracy I call good shooting them out of the 1/19 twist.
The 1/17 ROT .44-100 Rem st will shoot any of my bullets 1.503" long very well.