Time to continue load development with my .44-77.

[Kurt]

My problem is I have to many moulds and they all shoot very good with different powder and powder loads. I need to set some of those moulds aside and just use one.
I have one DD the .441/505 DD that is the last one I had BA make and I have not shot it much because I got into the .38 but I will get back to it again.
I would say the four moulds that are the most I have worked with and that is a Metford bullet, two tapered Gibbs, original sharps profile and the Sage.
The Sage bullet is a 510 gr at 1.457" long and it has shot very well at the 1K.
The 441/505 is 505 gr at 1.440" long and what little I have worked with it and it shoots very well and so does the 1.400" Metford.
I was going to do some shooting today but it didn't happen and rain for the next couple days.
I hope I can get to use the 200 yard range but I have been forced to the 180 yd because of repairs. Not much difference with 20 yards less.