Just another mould..or two.

[Distant Thunder]

Kurt,

Back when I was first using poly wads I cut mine from various jugs and bucket too and they were the same thickness as your's. In all my testing in the past 20 years the .060" LDPE wads have always given me the best accuracy even if only by a little. So I don't tend to stray too far with my wads, pretty much sticking to just the .060" LDPE.

I have never had an improvement with any wads stack I've tried, not until yesterday! The improvement over just the single LDPE wad was significant. I need to do a lot more testing of the under powder wads before I can say if it is worth it, but the 1 group yesterday sure had less vertical.

Seating two wads over the powder isn't a big deal, but get that coffee filter wads into the case and laying flat and centered is a pain in the butt. It would have to be a pretty good improvement before I would want to start doing for match shooting.

I was shooting over fresh white snow and I had snow coming down while shooting yesterday so recovering any patches or wads was impossible!

More testing, more shooting!