Which powder brand

[Kurt]

Mike my load for the .45-90 is 84 gr of 2F OE.
A ice-cream bucket .037" wad on the powder compressed enough to get a 1/8" lube wad and another plastic with the .443 BACO PP patches to just above bore. It was the load I used on the last target at the MT 1000. The first three targets at the 1000 I used 83 gr of 1.5 Swiss with the same wad stack but it only hit 50% on the first three targets.
I had Carol get the few of the OE loads I had left when the Swiss did not do well at the 1K. It was the best test load here at home on the 200 but failed at the 1K.
Kurt