+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: Trading Post (http://historicshooting.com/forum-30.html)
+--- Forum: Wanted (http://historicshooting.com/forum-32.html)
+--- Thread: W/B a .44 barrel (/thread-1197.html)
Pages:
1
2
W/B a .44 barrel - Kurt - 12-21-2014
I'm looking for a 1/16 or 1/17 ROT 32" 1.250 at the breach 1" + at the muzzle round .438/.446 barrel octagon is ok also.
Kurt
RE: W/B a .44 barrel - Mike - 12-22-2014
(12-21-2014, 01:23 PM)Kurt Wrote: I'm looking for a 1/16 or 1/17 ROT 32" 1.250 at the breach 1" + at the muzzle round .438/.446 barrel octagon is ok also.
Kurt
Kurt, Have you thought about Oregon Barrel Company? Another who could make that, I'm pretty sure, is John Taylor. Shoot sharp, Mike
RE: W/B a .44 barrel - Kurt - 12-22-2014
Mike.
My .44-75 Ballard is with a barrel from him. It has a awful deep groove. But it might be OK, don't know yet.
RE: W/B a .44 barrel - Mike - 12-22-2014
(12-22-2014, 04:21 PM)Kurt Wrote: Mike.
My .44-75 Ballard is with a barrel from him. It has a awful deep groove. But it might be OK, don't know yet.
I thought you already had a barrel from Oregon. I've got one too, going on a rolling block. The action is barreled now, wood isn't fitted yet.
RE: W/B a .44 barrel - Kurt - 12-22-2014
It's hard to find a .438/.446 barrel. I called Ron Smith a couple days ago to order a gain twist but he s not setup for the .438-.446.
RE: W/B a .44 barrel - Mike - 12-22-2014
Kurt, You say your Oregon barrel has deep grooves. Have you slugged that barrel? Just wondering. Shoot sharp, Mike
RE: W/B a .44 barrel - Iron Coyote - 12-22-2014
Kurt
If it is of any help,Track of The Wolf is showing some Green Mountain barrels in stock.
Thnx Lots
Bob
RE: W/B a .44 barrel - Kurt - 12-22-2014
Bob.
Thank you.
I called TOW and GM about that barrel for the HVY .44 Sharps. Everything is OK except the tulip flare. It's not long enough to cut threads on for the CPA. I have to call Gail to make sure.
Kurt
RE: W/B a .44 barrel - Kurt - 12-22-2014
Mike.
No I did not slug the barrel. Paul at CPA measured it when he mounted the barrel and stamped the dimensions on the underside of the barrel.
RE: W/B a .44 barrel - Mike - 12-22-2014
(12-22-2014, 09:29 PM)Kurt Wrote: Mike.
No I did not slug the barrel. Paul at CPA measured it when he mounted the barrel and stamped the dimensions on the underside of the barrel.
And are the grooves deeper than you expected? I'm curious because I haven't slugged or measured my barrel by Oregon.