+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: General (http://historicshooting.com/forum-1.html)
+--- Forum: Reloading (http://historicshooting.com/forum-4.html)
+---- Forum: Blackpowder cartridge (http://historicshooting.com/forum-18.html)
+---- Thread: Wiping technique (/thread-2169.html)
RE: Wiping technique - Old Jim - 08-10-2017
Bill, my jury is still out on the MPro-7 on wiping patches. Napa 6:1 works well with arsenal patches, but the "7" is still to be 'cifered. May try cotton patches, LOL
Jim
RE: Wiping technique - Hiwall55 - 08-10-2017
Thanks Jim,I've been using 8:1 NAPA Mix,I'll try 6:1 and M Pro 7 next time out.
RE: Wiping technique - Old Jim - 08-10-2017
I use a brass jag on the delron rod. I turned it down, after a couple of over-sized tries
, then got it the right size to drop the patch off at the mzl.Old guys learnin' new tricks,
Jim
RE: Wiping technique - Randy Bohannon - 08-14-2017
I bought a delrin rod from AZ S.S. for my 40-70SS, it's marked .40 cal. 10mm, it has a hole in the end I have not been able to screw anything in the hole, no jag no brush.It is so fat I can't even put 2" Pro Shot patch on it and push it through. Is the 10mm the right size for .40 cal ? a disappointing piece of equipment for me.
RE: Wiping technique - Gunlaker - 08-14-2017
Hi Randy,
The first set of rods I bought from Steve were just like yours. After talking to him he told me he only drills and taps them if the customer requests it.
Fortunately Delrin is really easy to work with, even for a non-machinist type like me. I bought a numbered bit and drilled and tapped it myself. For tapping you just have to go slowly, and back the tap up a bit now and then.
Chris.
RE: Wiping technique - Randy Bohannon - 08-14-2017
It appears to have a hole.how deep I haven't checked, thank you that is very helpful.I must have missed that key point when I ordered it.