Pistol Primers

[Kurt]

I been following your posts on the .40-82 and it sounds like a interesting cambering.
Can you tell me what the brass length is as it comes out of your chamber when fired and barrel twist your using and are you using the .40-65 sizing die for the brass.
I have one of the early Browning BPCR in .40-65 that had a bad chamber neck that looked like they used a undersized pilot when they cut the chamber so I had a throating reamer made with a 4 degree/1.5 compound lead and it cleaned up the chamber in good shape and made it a fine shooter. I would probably be foolish to lengthening out the neck farther to the 82, but the 82 is interesting.

Kurt