Bore wipers

[Don McDowell]

Jim I throw the dirty felts and the pins and buttons in a coffee can drop in a bit of oxy clean and fill with warm water put the lid on and roll and shake them a bit , and then drain the water and flush the can with the wipers in it with water. When the water turns clear I dump them in a metal strainer to dry.
On all my 45 and 44’s I use both felts wet 7-1 Napa cutting oil water, followed by a 2 1/2 inch flannel patch.
I only run 1 felt in the smaller 40,s but use 2 with the 90 bn and a 2 inch patch