Development of PP loads for the .44-77.

[J.B.]

    So here is a photo of the 'three' to be trialled on steel hopefully in a couple of weeks time. The photo magnification makes the errors in my patching more evident. My limited exposure to pp has told me that .03" overlap...seems to be forgiven..while the same in shortfall..or cover...is not so much. Still...I need to adjust my template to allow for the taper given the dual diameters. Always a work in progress. The first is the Kal dd Gibbs, the middle is the DD diameter nose pour I had Steve Brooks make for me based on a 45 mould I got from Tom Ballard nearly 30 yrs ago. The third, another dd Kal design, carrying a little more weight in the nose.