Little Missy

[Kurt]

Hanz I only shoot a PP bullet so I designed the reamer to just except a bore diameter PP bullet. The case neck is .424" allowing just enough room to seat a bullet 1-1/2 thousands over bore diameter in the case then a 5 degree 2-1/2 degree compound chamber end instead of the 45 degree normally used and the base diameter is reduced for the dimensions the Starline brass uses so the bulge ahead of the rim does not show up after several shots fired.
A normal chamber for GG bullets have a neck diameter of .434 to .436" plus/minus a little into a 45 degree plus some use a lot of freebore.
If I run out of ammo I'm done I cant use someone else's but they can use mine in their rifle