PP and SPG

[ken s]

I'm going to try something. I have a 40 70 SS and use a 330 custom Brooks PP mold.
with the 55 W and 55Y as paper. over 64 1/2 2F Old E. and an .006 wad with two newspaper wads over that. very slight compression.
I have a .408 sizing die, and ran a bunch through it to give it a slight SPG coating.
Anyone have any experience doing this?

The bullet is NOT sizerd and the patch is clean and really untouched.
the Sharps is original and the bore is fine.... rifling is all there, but not mirror..

I wonder???? Ken

OK I tried these at the range. they swelled so chambering the round was hard.
Some just stuck out. accuracy was poor.
so much for experimenting.....Ken