Olde Eynsford 2F in the .44/90

[Mike]

Today's shooting with the .44/90 really wasn't worth talking about. Anyway, I did do some shooting with a target at 200 yards. Compared to the loads of 90 grains of 1 1/2F powder, the loads using 90 grains of 2F powder hit slightly lower. That is most likely because of a higher velocity, giving the bullet less time in the barrel and having a small effect from the rifle's recoil. Anyway, my shooting today was lousy so no photos of the target will be shown. But here is a photo of the rifle... Another try will be made. Shoot sharp, Mike