Historic Shooting Forums › General › Reloading › Paper Patch v
Patching the 32-40

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
Patching the 32-40
11-30-2016, 11:22 AM,
#6
Gunlaker
Guest
 		 
RE: Patching the 32-40
For me breech seating PP bullets worked best when seating an LDPE wad with the bullet. I made a seater for my .38-55 by cutting a length of aluminum round stock to bore diameter. I drilled out the primer pocket of a .38-55 case and used a bolt with a jamb nut to push on the aluminum rod. This made it adjustable, and also allows me to seat wads with the bullet. I'll find a picture in a minute.

Chris.
Reply


Messages In This Thread
Patching the 32-40 - by Don McDowell - 11-29-2016, 06:07 PM
RE: Patching the 32-40 - by Gunlaker - 11-29-2016, 08:26 PM
RE: Patching the 32-40 - by Don McDowell - 11-29-2016, 08:28 PM
RE: Patching the 32-40 - by bruce moulds - 11-30-2016, 06:21 AM
RE: Patching the 32-40 - by Don McDowell - 11-30-2016, 10:34 AM
RE: Patching the 32-40 - by Gunlaker - 11-30-2016, 11:22 AM
RE: Patching the 32-40 - by Gunlaker - 11-30-2016, 11:25 AM
RE: Patching the 32-40 - by Don McDowell - 11-30-2016, 12:14 PM
RE: Patching the 32-40 - by Gunlaker - 11-30-2016, 12:58 PM
RE: Patching the 32-40 - by Don McDowell - 11-30-2016, 01:48 PM
RE: Patching the 32-40 - by bruce moulds - 11-30-2016, 04:03 PM
RE: Patching the 32-40 - by MIEagle - 10-02-2018, 07:40 AM
RE: Patching the 32-40 - by Flatlander - 10-03-2018, 02:09 PM
RE: Patching the 32-40 - by Flatlander - 10-04-2018, 02:38 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication