Thread Rating:
- 0 Vote(s) - 0 Average
- 1
- 2
- 3
- 4
- 5
|
Buffalo Arms Bore wipe system
|
|
09-12-2016, 09:21 PM,
|
|
|
Randy E.
Junior Member
 
|
Posts: 18
Location:
Joined: May 2012
Reputation:
0
|
|
RE: Buffalo Arms Bore wipe system
(09-11-2016, 08:12 PM)Hiwall55 Wrote: Got my bore wipes on Saturday, went to the range this morning to try them out. Put my oil/water mix in tub with the bore wipes and shot some 400 yard targets. All greasers,First 5 with my good load 4 out of 5 in a 6inch bull, looking good. . Then tried some different loads, not to good. I was putting a dry patch behind the bore wipes, by then all the Black gun guys showed up so I cleaned my rifle. Whoa lead mine! I've never got any lead out of this rifle before. On the way home I thought I should have put a oiled patch behind the bore wipe, so when I got home got my brass in the ceramic mix and headed out to a different range . This time I used water in the tub with bore wipes and followed it with a water soluble oil mix on the patch. This range only goes to 300 so set up a 10"swingers and put 20 shots right on top of each other. Clean up showed no lead. Guess you just have to figure these things out for them to work right.
|
|
|
|
| Messages In This Thread |
RE: Buffalo Arms Bore wipe system - by Randy E. - 09-12-2016, 09:21 PM
|
Users browsing this thread: 1 Guest(s)