Accurate Mould

[Nuclearcricket]

Glad you got the case out without damage to the die. I have had to extract a few cases over the years. Usually I have been able to drill and tap them 1/4-20 and use a cap screw and a stack of hardeded washers to pull the case out. I have also used a tap run into the case and an arbor press to press the case out. All in all its never a good thing to get one stuck. It also shows you how much leverage your press does have. My Dillon is the easiest press to rip case rims off with. Surprised the hell out of me the first time.
That is the press that taught me the lesson of cleaning the sizing die very carefully when changing lubes. Some brands just don't play well with others.
Sam