Accurate Mould

[Kurt]

I don't know Mike. This rifle has very shallow grooves and at the moment I don't have any linotype or WW to make a harder #2 alloy. I tried to push a 1800 fps load in it once and I mined lead for several hours.
I started to load some rounds and the very first shell into the sizing die I pulled the rim off. Not lubed good enough. This is a RCBS die that has the 1/4X28 stem threaded right through the top of the die and no way to get the stem out so I drilled and tapped the primer pocket and put a long 1/4X20 bolt in the head of the shell and rigged it up in the swage press to pull the case from the die, no go!! I must have swelled the head and expanded the base of the shell making it tighter.
I will work on it tomorrow

Anyway I loaded 500 rounds of 9mm for Carolyn to shoot. she sure is blasting that SR-9 Ruger we spent the day at the indoor range yesterday and shot up around 275 rounds with that little gun while I was shooting my CAP .22 off hand practice.
I guess Carol is making up for the 50 years we been married without shooting LOL. I don't have to ask...you want to go to the range? she tells me lets go shoot