Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
73 Uberti 44-40
11-03-2015, 06:49 PM,
#11
RE: 73 Uberti 44-40
Just time for a quick outing on the range today so I used my Uberti Schofield 44-40 instead of the 73 rifle. I had 60 rounds loaded with smokeless and 25 loaded with GOEX 2 fg. 300 cases are sized and trimmed ready to reload so that will be my next project. I posted my 25 yard timed and rapid fire target at 15 yards and started with the smokeless load. A few rounds out of the black and remembered to shift my grip. I have to shoot this revolver with a high thumb perched along side of the hammer on the frame. If I do not do this I have a tendency to string shots to the left. After 20 rounds I changed to the black powder loads. These shot to the same poi as the smokeless using American Select. 15 rounds later the cylinder was just starting to get sluggish and I rotated the cylinder while pushing to the rear to scrape fouling off using the cylinder stop on the top strap. A few spins and things were rotating freely again. Fired another 10 rounds with smokeless and then the last 10 with black powder. Everything was working like a charm and I fired the last of my smokeless ammo and as they used to say, " The black was shot all to tatters!" Impressed several shooters on the line when I shot those black powder loads alright! Smokeless brass is in the tumbler and the black powder brass is about to get de-capped and ready for cleaning. That fine revolver will get spiffed up after supper. Pretty satisfying day. When I first got the Uberti 44-40 and my Armi San Marco in 45 Colt I used a fine needle file to lower the hand notch in the frame a tiny bit and peened the tip of the hand and used Kasenit to add a little toughness to it. This gives the hand a bit more purchase on the cylinder ratchet for more positive rotation. The other thing I did on both is to put a slight radius on the back of the cylinder to help minimize binding due to fouling. I really think these little tune ups help keep the guns running when using black powder. Just another fine day on the range!!
Reply


Messages In This Thread
73 Uberti 44-40 - by Eric Johanen - 11-01-2015, 05:10 PM
RE: 73 Uberti 44-40 - by Mike - 11-02-2015, 12:32 AM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-02-2015, 09:50 AM
RE: 73 Uberti 44-40 - by Mike - 11-02-2015, 10:58 AM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-02-2015, 02:22 PM
RE: 73 Uberti 44-40 - by Mike - 11-02-2015, 03:43 PM
RE: 73 Uberti 44-40 - by Stephen Borud - 11-02-2015, 08:54 PM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-02-2015, 09:24 PM
RE: 73 Uberti 44-40 - by Mike - 11-02-2015, 10:33 PM
RE: 73 Uberti 44-40 - by Dave Roelle - 11-02-2015, 11:02 PM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-03-2015, 06:49 PM
RE: 73 Uberti 44-40 - by Mike - 11-03-2015, 07:45 PM
RE: 73 Uberti 44-40 - by Stephen Borud - 11-03-2015, 08:22 PM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-03-2015, 08:31 PM
RE: 73 Uberti 44-40 - by Dave Roelle - 11-03-2015, 09:13 PM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-03-2015, 09:28 PM
RE: 73 Uberti 44-40 - by Stephen Borud - 11-04-2015, 12:03 AM
RE: 73 Uberti 44-40 - by Mike - 11-04-2015, 12:41 AM
RE: 73 Uberti 44-40 - by Mike - 11-04-2015, 12:45 AM
RE: 73 Uberti 44-40 - by Mike - 11-07-2015, 12:06 AM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-07-2015, 10:17 AM
RE: 73 Uberti 44-40 - by Mike - 11-07-2015, 10:53 AM
RE: 73 Uberti 44-40 - by Mike - 11-07-2015, 11:24 AM
RE: 73 Uberti 44-40 - by Stephen Borud - 11-07-2015, 11:51 AM
RE: 73 Uberti 44-40 - by Eric Johanen - 11-07-2015, 12:06 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication