Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New 44-77 PP Mold
06-25-2015, 06:49 PM,
#5
RE: New 44-77 PP Mold
Yesterday I had mixed results with KIK 2F at 75 and 77 grains.

Today with my "seconds" bullets (wrinkles on them) I tried 75 gr KIK 1 1/2F, Swiss 1 1/2F, and Goex 1F
using two three shot groups each from clean olive oiled barrel for each group simulating gun conditions in the field when hunting. Fired the three shots quickly.

Swiss 1.5F averaged 1.5"
KIK 1.5F averaged 1.9"
Goex 1F averaged 2.4"

winds variable 5-10

100 yards

I think Swiss 1.5F will be the powder of choice. It works best in my other two sharps also.
Reply


Messages In This Thread
New 44-77 PP Mold - by Denali - 06-12-2015, 09:53 AM
RE: New 44-77 PP Mold - by Mike - 06-12-2015, 10:14 AM
RE: New 44-77 PP Mold - by bruce moulds - 06-12-2015, 07:16 PM
RE: New 44-77 PP Mold - by Denali - 06-13-2015, 12:20 AM
RE: New 44-77 PP Mold - by Denali - 06-25-2015, 06:49 PM
RE: New 44-77 PP Mold - by Don McDowell - 06-25-2015, 08:02 PM
RE: New 44-77 PP Mold - by bruce moulds - 06-26-2015, 05:34 AM
RE: New 44-77 PP Mold - by Denali - 06-26-2015, 05:51 AM
RE: New 44-77 PP Mold - by Don McDowell - 06-26-2015, 09:43 AM
RE: New 44-77 PP Mold - by Denali - 06-26-2015, 09:52 AM
RE: New 44-77 PP Mold - by Don McDowell - 06-26-2015, 10:04 AM
RE: New 44-77 PP Mold - by Denali - 06-26-2015, 01:36 PM
RE: New 44-77 PP Mold - by Don McDowell - 06-26-2015, 01:49 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication