Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sizing bullets
01-05-2015, 08:12 AM,
#16
RE: Sizing bullets
As to the bullet fit in my 40, I found a round with what looks like an unsized bullet in it and it dropped in most of the way, without forcing things I am thinking the bullet is set too far out and is hitting the lands so it looks like unsized bullets will chamber.
Kurt, as to making some free-bore in a bullet sizer die, that wouldn't be hard to do, just take some time. If you get a barrel lap, and most likely you will end up with one somewhat smaller than you need, when you expand the lap you get the barrel shape (), if you work this in and out of the sizer die you will eventually get your tapered lead, it will just take some time depending on the type and grit of compound you use. A very mill would probably be better to use as you can set a positive stop easily, but a lathe will work if you put a flag on the tail stock quill and an indicator to use as a stop reference.
Sam
Reply


Messages In This Thread
Sizing bullets - by Nuclearcricket - 01-03-2015, 11:57 AM
RE: Sizing bullets - by Gunlaker - 01-03-2015, 01:23 PM
RE: Sizing bullets - by Don McDowell - 01-03-2015, 01:25 PM
RE: Sizing bullets - by Kurt - 01-03-2015, 01:42 PM
RE: Sizing bullets - by Nuclearcricket - 01-03-2015, 03:13 PM
RE: Sizing bullets - by Kurt - 01-03-2015, 03:49 PM
RE: Sizing bullets - by Lumpy Grits - 01-03-2015, 03:53 PM
RE: Sizing bullets - by bruce moulds - 01-03-2015, 05:28 PM
RE: Sizing bullets - by Kurt - 01-03-2015, 05:32 PM
RE: Sizing bullets - by bruce moulds - 01-03-2015, 06:48 PM
RE: Sizing bullets - by Nuclearcricket - 01-04-2015, 02:45 PM
RE: Sizing bullets - by Gunlaker - 01-04-2015, 03:32 PM
RE: Sizing bullets - by Nuclearcricket - 01-04-2015, 05:33 PM
RE: Sizing bullets - by Kurt - 01-04-2015, 06:44 PM
RE: Sizing bullets - by Kurt - 01-04-2015, 09:35 PM
RE: Sizing bullets - by Nuclearcricket - 01-05-2015, 08:12 AM
RE: Sizing bullets - by bruce moulds - 01-06-2015, 04:02 AM
RE: Sizing bullets - by bobw - 01-06-2015, 11:24 AM
RE: Sizing bullets - by Kurt - 01-06-2015, 12:10 PM
RE: Sizing bullets - by bruce moulds - 01-06-2015, 02:57 PM
RE: Sizing bullets - by laowho - 12-31-2015, 03:09 PM
RE: Sizing bullets - by laowho - 01-01-2016, 10:09 AM
RE: Sizing bullets - by Lumpy Grits - 01-01-2016, 11:52 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication