+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: General (http://historicshooting.com/forum-1.html)
+--- Forum: Reloading (http://historicshooting.com/forum-4.html)
+--- Thread: sizing 44-90 cases (/thread-397.html)
sizing 44-90 cases - powderburner - 03-27-2013
Kurt ,
did you size any of your Jamison 44-90s to 44-77 and if you did could you tell me what the neck thickness is. thanks
RE: sizing 44-90 cases - Kurt - 03-27-2013
No Dean I havent. I havent had the need to make .44-77 cases.
I have a few that I pulled the neck from some 90 cases but those are from the HDS .44 basic brass.
I will dig in the scrap box and see if I still have some cases and run them through the die and take some measurements.
Are you needing some thicker neck wall cases??
Kurt
RE: sizing 44-90 cases - powderburner - 03-27-2013
(03-27-2013, 11:39 AM)Kurt Wrote: No Dean I havent. I havent had the need to make .44-77 cases.I have to size my brass about 2 tho , and was hoping that the 44-90 brass would be just a tat thicker down a bit, but I am only interested in Jamison because they have it available.
I have a few that I pulled the neck from some 90 cases but those are from the HDS .44 basic brass.
I will dig in the scrap box and see if I still have some cases and run them through the die and take some measurements.
Are you needing some thicker neck wall cases??
Kurt