+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: General (http://historicshooting.com/forum-1.html)
+--- Forum: Reloading (http://historicshooting.com/forum-4.html)
+---- Forum: Paper Patch (http://historicshooting.com/forum-41.html)
+---- Thread: Freebore Load (/thread-1153.html)
Freebore Load - Semtav - 11-02-2014
Finally had a chance to test out my PP load under ideal conditions. 800 and 900 yards showed excellent results with most of the shots grouping in a small area on the same part of the target. But moving to 1000 yards i was getting shots going hi, low, left and right. Could have been the shooter, but every time i've shot this load at 1000 I do horrible.
I'm going to up my load by 5 gr swiss 1 1/2 and see if that will improve the accuracy at 1000 yds or if its just me.
Rifle is a Winchester 1885 45-90 with 34in barrel.
PJ .454 money bullet 12.5-1 alloy patched to groove dia.
90 grains of swiss 1 1/2 powder
RE: Freebore Load - Don McDowell - 11-02-2014
I would bet that bullet is loosing stability at 900 or a little past. That extra dab of powder might be enough to keep it stable to 1000,
but there's only 1 way to find out.