Historic Shooting Forums
New bullet, new prob ... - Printable Version

+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: General (http://historicshooting.com/forum-1.html)
+--- Forum: Reloading (http://historicshooting.com/forum-4.html)
+---- Forum: Blackpowder cartridge (http://historicshooting.com/forum-18.html)
+---- Thread: New bullet, new prob ... (/thread-81.html)

Pages: 1 2 3 4 5


RE: New bullet, new prob ... - Lumpy Grits - 07-03-2013

Jim-Watch outExclamation
Don is real good at set'n a 'hook'. Big Grin
Gary


RE: New bullet, new prob ... - sluggun pilgrim - 07-05-2013

(07-03-2013, 11:00 AM)Gunlaker Wrote: With respect to the leading and breech seating... I am no expert but have a few rifles that I shoot breech seated grease grooved bullets in. I wipe between shots and have found that if I follow the wiping with a dry patch then I'll get leading within 5 or 6 shots. Enough to create a flyer that is really obvious. If I do not use a dry patch then the problem goes away. The smaller calibers really seem to be sensitive to bore condition. Way more than my .45's.

I have one rifle that likes me to dry the bore when breech seating but that one uses paper patched bullets. :-)

Chris.




RE: New bullet, new prob ... - sluggun pilgrim - 07-05-2013

Hi Chris

I do clean between shots, 2 damp Ballistol and water and 2 dry. Will try loading on a wet barrel.

Cheers
sluggun pilgrim


RE: New bullet, new prob ... - Lumpy Grits - 07-05-2013

Keep that chamber DRYExclamation
Gary


RE: New bullet, new prob ... - Don McDowell - 07-05-2013

If you are not "riceing" your wet patches you may want to try that. Patches that are to wet don't mix well with grease groove bullets. Also ballistol is good for a lot of things, but a bore wiping solution not so much. A couple of solutions that do work well is 50-50 rv antifreeze and water, and 7-1 water and NAPA water soluble cutting oil.


RE: New bullet, new prob ... - Gunlaker - 07-05-2013

Don,

What does riceing patches mean? Some way of squeezing out the extra moisture?

Thanks,

Chris.



RE: New bullet, new prob ... - Don McDowell - 07-05-2013

Chris, yes you put a handful of patches in a potatoe ricer and squeeze the juice out of them.


RE: New bullet, new prob ... - Gunlaker - 07-05-2013

Ah, thanks.

Chris.



RE: New bullet, new prob ... - sluggun pilgrim - 07-08-2013

Hi Guys
Last Saturday i tried a couple of combinations. I damp Ballistol asnd one dry, leading after the 6 th shot. The tried 2 damp patches , hust dried the chamber (to avoid case seperation) After 10 shots ran some wipeaway through the barrel, no lead.

I'm not sure whether I can get the antifreeze or the NAPA water soluble cutting oil here in Australia.
Cheers sluggun pilgrim


RE: New bullet, new prob ... - sluggun pilgrim - 07-12-2013

Hi Don

Checked out the anti-freeze available here. All that is available is a product that is anti-freeze, anti-boil and anti coorsion. As we don't get very low temperatures here I presume that there isn't a market for straight anti-freeze.

Cheers sluggun pilgrim